Rear overfender RIGHT StreetPro - BMW E46 coupe

Developed for the BMW E46 Coupe platform, these rear overfenders are an integral component of the Racing Team Riga StreetPro body kit. Featuring the exact same exterior design and wheel arch profile as the complete StreetPro Rear Quarter Panels, they provide a more accessible way to achieve the full StreetPro appearance while retaining the original rear quarter panels.

1. Part of the Racing Team Riga StreetPro body kit;
2. Designed for BMW E46 Coupe (Pre-Facelift & Facelift);
3. Features the identical exterior design and wheel arch profile as the complete StreetPro Rear Quarter Panels;
4. Manufactured using the vacuum infusion process for excellent laminate quality, strength, and consistency;
5. Available in multiple material options;
6. Rear quarter width: +30mm per side.

The StreetPro Rear Overfenders retain the exact same exterior appearance as the complete StreetPro Rear Quarter Panels while allowing the original rear quarter panels to remain in place. They are designed to create a seamless transition into the StreetPro body profile, preserving the original BMW E46 design language and the vehicle's proportions.

To provide adequate clearance for wider wheel and tyre combinations, a section of the original rear wheel arch must be removed during installation. The overfenders are supplied with additional material around the outer perimeter, allowing the installer to trim and finish each edge according to the specific requirements and design preferences of the individual build. Installation can be carried out using the customer's preferred attachment method.

The original fuel filler door is replaced with the dedicated StreetPro Fuel Filler Door, designed to complement the StreetPro body kit. At this time, an OEM-style hinge mechanism is not available and will be introduced at a later stage.

Compatibility

Compatible with both Pre-Facelift and Facelift BMW E46 Coupe models.

Compatible with OEM and aftermarket rear bumpers. When used with an OEM rear bumper, minor trimming of the bumper wheel arch profile is required to match the redesigned StreetPro wheel opening.

Installation

Professional installation is strongly recommended.